Rotax 912 i Series Maintenance Manual page 359

Fig. 15
1. EGT_1
Step
5 Loosen the M5x16 Allen screws with
washers from double ignition coils.
Fig. 16
1. M5x16 Allen screw
3. Plug holder
Step
6 Unplug the connection to the double igni-
tion coils.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. EGT_2
Procedure
2. 5.3 washer
Procedure
Fig. 17
1. Double ignition coils
Step
7 Carefully pull EGT_3 and EGT_4 (cy-
linder 3/4) out of the locking plate.
8 Press the metal bracket and separate the
connectors.
Fig. 18
1. EGT connector
2. Ignition coil connector
(COIL_1, COIL_2,
COIL_3, COIL_4)
Procedure
76-50-00
Page 11
July 01/2012