Rotax 912 i Series Maintenance Manual page 327

Extracting of log-files
Step
1 Launch B.U.D.S. Aircraft by double click-
ing the desktop icon.
Alternatively B.U.D.S. Aircraft can also be
started through the start menu entry (e.g.
Start - Programm - BUDS - run BUDS).
Fig. 16
B.U.D.S.Aircraft Start
Step
2 Wait until the program has been started
completely.
3 Change from " Diagnostic Mode" Tab to
"Maintenance Mode" Tab.
If the ECU at the time is supplied with
NOTE:
power, a restart is required.
Effectivity: 912 i Series
Edition 1/Rev. 1
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
09960
Procedure
Fig. 17
B.U.D.S. Aircraft "Maintenance Mode"
Step
4 Open the "Preferences" window by click-
ing on the Preferences Button.
5 In the "Maintenance Mode" section, the
default Log directory can be set.
Either the path to the Log directory can be
set here or the user will be invited to de-
clare a Log directory right before the ex-
traction process.
6 Click "OK" to close the window.
Fig. 18
B.U.D.S. Aircraft "Preferences"
09961
Procedure
09962
76-10-00
Page 15
October 01/2013