Rotax 912 i Series Maintenance Manual page 247

Fig. 21
1. Double ignition coils
NOTE: The red cable is positive (+), the red
cable with the black dash is negative (-).
Double ignition coils are labelled + and -!
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. Ignition coil connector
(coil 1, coil 2, coil 3, coil 4)
LEFT-HAND 2/4 INTAKE MANIFOLD -
REMOVAL
Step
1 Remove the 1-ear clamps.
Fig. 22
1. 1-ear clamps
Step
2 Loosen 4 M6 hex./torx collar screws in-
wards for attachment to the cylinder head
2/4.
3 Loosen the two inner hex./torx collar
screws.
NOTICE
WARNUNG
Screws cannot be completely unscrewed. To
remove the screws, the intake manifold must be
lifted after loosening all 4 hex./torx collar sc-
rews.
NOTE: The intake manifolds have ports rather
than bores for the M6 hex./torx collar
screws.
Procedure
2. Intake manifolds
Procedure
73-10-00
Page 15
July 01/2012