Rotax 912 i Series Maintenance Manual page 363

KNOCK SENSOR - DISCONNECTION
Wiring harness designation:
- KNOCK
See Fig. 28.
Step
1 Lift the latch and pull apart.
AIRBOX PRESSURE SENSOR AND TEM-
PERATURE SENSOR - DISCONNECTION
Wiring harness designation:
- MAPS_1 and MATS_1 for LANE A
- MAPS_2 and MATS_2 for LANE B
Step
1 Remove the 4 cable ties.
2 Unplug the connectors of the 2 pressure
sensors.
3 Lift the latch and pull off.
Fig. 29
1. Pressure sensors
3. Cable ties
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
Procedure
2. Temperature sensor
Fig. 30
1. Pressure sensor
Step
4 Unplug the connectors of the 2 tem-
perature sensors.
5 Press the metal bracket and separate the
connectors.
Fig. 31
1. Temperature sensor
Step
6 Remove the cable ties on the airbox.
Procedure
Procedure
76-50-00
Page 15
July 01/2012