Rotax 912 i Series Maintenance Manual page 250

THROTTLE BODY ASSY.
- REMOVAL
Preparation
- General visual inspection. See relevant Main-
tenance Manual Line for the 912 i Series
engine type.
Step
1 Remove the throttle body assy.
2 Remove the air filter and air intake hose
(delivered by manufacturer) from the
throttle body assy.
Fig. 30
1. Throttle body assy.
3. Air filter
Step
3 Remove the throttle cable from the throttle
body.
4 Loosen 3 M6x12 hex./torx collar screws
with the fixation latch.
NOTE: They are adhered with LOCTI-
TE 243!
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Connector
4. Screw hose clamp
Procedure
Fig. 31
1. M6x12 hex./torx collar screws
NOTICE
WARNUNG
Do not lose the rubber gasket ring and ensure
that it does not remain in the airbox.
Step
5 Remove the throttle body and the rubber
gasket ring.
Fig. 32
1. Throttle body
2. Fixation latch
Procedure
2. Rubber gasket ring
73-10-00
Page 18
July 01/2012