Rotax 912 i Series Maintenance Manual page 75

REMOVAL
Preparation
- Loosen pulley tension. See the most recent
Maintenance Manual Line.
- Remove the propeller. See "Documentation
of aircraft manufacturer"
V-BELT PULLEY - REMOVAL
Step
1 Loosen 8 M5x16 Allen screws with lock
washers.
2 Remove pulley carriers, v-belt pulley and
v-belt.
Fig. 1
1. M5x16 hex, screws
3. Pulley carrier
5. V-belt
ALTERNATOR - REMOVAL
Step
1 Loosen 2 M8x20 hex. screws along with
lock washers and washers.
2 Remove the tension bar underneath the
external generator.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Lock washers
4. V-belt pulley
Procedure
Fig. 2
1. M8x20 hex. screws
3. Washers
Step
3 Loosn M10x45 hex. screw and remove
the alternator and washer.
Fig. 3
1. M10x45 hex. screw
3. External alternator
Fig. 4
See
Step
4 Loosen 2 M8x20 Allen screws along with
lock washers and remove the alternator
bracket.
2. Lock washers
4. Tension bar
Procedure
2. Washer
Procedure
24-30-00
Page 5
July 01/2012