Rotax 912 i Series Maintenance Manual page 362

Fig. 25
1. Throttle valve 2. Throttle potentiometer
3. Cable ties
TEMPERATURE SENSOR (OIL) AND
PRESSURE SENSOR (OIL) - DISCON.
Wiring harness designation:
- Temperature sensor OTS
- Pressure sensor OPS
Step
1 Remove cable ties.
2 Unplug the temperature sensor and pres-
sure sensor:
Lift the latches + pull out the connectors.
Fig. 26
1. Temperature sensor
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
Fig. 27
1. Pressure sensor
CRANKSHAFT POSITION SENSOR - DIS-
CONNECTION
Wiring harness designation:
- CPS_1 for LANE A (yellow mark)
- CPS_2 for LANE B
Step
1 Unplug CPS 1 and CPS 2
Fig. 28
1. CPS_1 LANE A
3. KNOCK knock sensor
2. Cable ties
Procedure
2. CPS_2 LANE B
76-50-00
Page 14
July 01/2012