Rotax 912 i Series Maintenance Manual page 108

Fig. 22
1. Governor flange
3. M6x16 Allen screw
Step
4 Install the propeller gearbox. See also
section 72-00-00 Gearbox.
5 Install the governor pressure oil line on
the governor flange and on the oil pump
housing.
Tightening torque 17 Nm (150.42 in.lb.)
6 Fasten the governor pressure oil line with
the cable clamp using the M8x25 hex.
screw and LOCTITE 243.
Tightening torque 15 Nm (132.72 in.lb.)
Fig. 23
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. M6x20 Allen screw
Procedure
1. Governor flange
3. A10x14 gasket ring
5. 8.4 distance sleeve
7. A8 lock washer
9. Oil pump
Step
7 The plug screws usually remain closed. If
necessary, a manometer can be connect-
ed to check the governor pressure.
8 Secure the M8x1 plug screws with
LOCTITE 243.
Fig. 24
1. Governor flange 2. M8x1 plug screw
2. M10x1 banjo bolt
4. Governor pressure oil
line assy.
6. 8/M8 cable clamp
8. M8x25 hex. screw
Procedure
61-20-00
Page 14
July 01/2012