Rotax 912 i Series Maintenance Manual page 40

No.
1
2
3
4
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Part no.
n.a. Cleaning agent
WARNUNG
Use only approved cleaning agents (e.g. varsol etc.) for
cleaning metal parts.
Do not use lyebased cold cleaners or degreasing agents. Do
not clean coolant and oil hoses with aggressive solutions.
Clean off residues of sealing compound with sealant remo-
ver.
Soak combustion chamber, piston and cylinder head with
cleaning agent and remove combustion residues with a
bronze brush. CASTROL „Clenvex 2000" has proved very
effective. It is a solvent - cold cleaner, free of halogen, on the
basis of selected fuel fractions and is biodegradable.
Never use caustic of corrosive cleaning agents.
n.a. Multipurpose grease LZ
Generally usable, neutrally colored multipurpose grease,
water resistant and highly adherent. Usable for temperatures
from -35 °C to +120 °C (-31 °F to 248 °F) and can be
subjected to high mechanical loads.
n.a. Preservation oil
This special oil has excellent penetrating capabilities and
reaches even tiny gaps, it is highly effective additives protect
against corrosion of metal surfaces.
n.a. Flexible web for surface finishing 3M Scotch-Brite Multi Flex
- very fine or ultra fine
Is sold by the meter and used for manual removal of smaller
rust spots or oxidation, especially for optimum ground con-
nections. It is particularly suitable for removing LOCTITE
from surfaces or threads to make them metallic clean. Bevo-
re re-applying LOCTITE, clean surfaces with nitrothinner or
degreasing agent (CASTROL ZA 30 or OMV - SOFT SOL).
When using solvents, observe the safety regulations for per-
sons and the environment.
Description, application
WARNING
Qty.
as
required
as
required
as
required
as
required
00-00-00
Page 26
July 01/2012