OIL FILTER INSTALLATION
Step
5
Install the oil filter. See relevant Main-
tenance Manual Line for the 912 i Series.
NOTE:
Oil the gasket of the oil seal.
6
Install the oil lines.
FINISHING WORK
- Fill with fresh oil.
See relevant Maintenance Manual Line for
the 912 i Series.
- Bleed the oil system.
See relevant Maintenance Manual Line ) for
the 912 i Series.
- Carry out an engine test run and leakage
check.
Then check that the oil seal is securely
NOTE:
fitted after the test run.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
79-00-00
Page 18
July 01/2012