Rotax 912 i Series Maintenance Manual page 134

INSTALLATION
INSTALLATION OF THE ENGINE SUSPEN-
SION FRAME
NOTICE
WARNUNG
The engine suspension frame must be installed
in a tension-free manner. Space out the engine
suspension frame with thrust washers.
The M10x110 Allen screws must con-
NOTE:
form to strength class 10.9.
The engine suspension frame are installed and
removed in the same way. See Removing the
engine suspension frame. Note:
- Tightening torque of the
M10x110 and M10x35 hex screws is
40 Nm (353.92 in. lb.)
FINISHING WORK
- Install the water pump. See section 75-00-00.
- Install the coolant hoses. See section 75-00-
00.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
71-00-00
Page 24
July 01/2012