Rotax 912 i Series Maintenance Manual page 267

Fig. 80
1. M6x16 Allen screw
3. 8/M6 cable clamp
Step
3 Install the inlet and outlet lines on the 1/3
and 2/4 fuel rails.
Fig. 81
1. Inlet line
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. 6.4 washer
Procedure
2. Outlet line
FINISHING WORK
- Fill the fuel and coolant systems. See also
section 12-20-00 Planned maintenance.
- Install the bowden cable on the throttle body.
See section 70-00-00 Standard work on the
engine.
- Adjustment of the throttle position, sensor
position and idle speed. See section 70-00-00
Standard work on the engine.
73-10-00
Page 35
July 01/2012