Rotax 912 i Series Maintenance Manual page 300

WATER PUMP HOUSING - INSPECTION
Step
1 Check the water pump housing for dam-
age, deformation and leaks.
2 Check the inner side for any signs of con-
tact with the impeller.
NOTE:
If signs of contact are found, the
water pump housing must be re-
placed.
Fig. 16
1. Feeler gauge
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Water pump housing
75-00-00
Page 12
July 01/2012