Rotax 912 i Series Maintenance Manual page 305

Fig. 24
1. Spring type hose clip 35
3. Preformed hose 3
5. Preformed hose radiator outlet
Fig. 25
1. Spring type hose clip 35
3. Preformed hose 3
Step
6 Install the spring type hose clip 25 on pre-
formed hose 1.
NOTE: Align the spring type hose clip
25 so that it is 2 mm (0.0787 in.)
away from the spring type hose
clip on preformed hose 3.
7 Push on preformed hose 1 and align it
horizontally like preformed hose 3.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. Spring type hose clip 25
4. Expansion tank
2. Spring type hose clip 25
4. Expansion tank
Procedure
Fig. 26
1. Preformed hose 1
3. Expansion tank
Fig. 27
1. Preformed hose 1
3. Expansion tank
2. Preformed hose 3
2. Preformed hose 3
4. Spring type hose clips
75-00-00
Page 17
July 01/2012