Safety Notice - Rotax 912 i Series Maintenance Manual

3) Safety notice

Although the reading of such information does not eliminate the hazard, under-
General note
standing the information will promote its correct use. Always use common work-
shop safety practice.
The information and components system descriptions contained in this Manual
are correct at the time of publication. BRP-Powertrain, however, maintains a
policy of continuous improvement of its products without imposing upon itself
any obligation to install them on its products previously manufactured.
BRP-Powertrain reserves the right at any time, and without incurring obligation,
Revision
to remove, replace or discontinue any design, specification, feature or other-
wise.
Specifications are given in the SI metric system with the USA equivalent in par-
Measure
enthesis.
This Manual uses the following symbols to emphasize particular information.
Symbols used
This information is important and must be observed.
Identifies an instruction which, if not followed, may cause serious
injury including the possibility of death.
Identifies an instruction which, if not followed, may cause minor or mo-
derate injury.
Denotes an instruction which, if not followed, may severely damage the
engine or other component.
NOTE:
ENVIRONMENT NOTE
Environment note gives you tips and behaviors to environmental protec-
tion.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
WARNUNG
WARNUNG
WARNUNG
Indicates supplementary information which may be needed to
fully complete or understand an instruction.
A revision bar outside of the page margin indicates a change to
text or graphic.
WARNING
CAUTION
NOTICE
00-00-00
Page 9
July 01/2012