Rotax 912 i Series Maintenance Manual page 246

Fig. 17
1. M6x14 Allen screw
3. 12/M6 cable clamp
Step
2 Disconnect the 4 ignition coil connectors
on both sides.
NOTE: Use a suitable tool to pull out
the ignition coil plugs.
Fig. 18.
1. Ignition coil connector
3. EGT connector
Step
3 Carefully pull EGT 1 and EGT 2 (cylinders
1 and 2) out of the locking plate.
4 Press the metal bracket and unplug the
connectors.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. 6.4 washer
Procedure
2. Double ignition coils
Procedure
Fig. 19
1. EGT connector
Step
5 Loosen the M5x16 Allen screws of the
double ignition coils with washers.
Fig. 20
1. M5x16 Allen screw
3. Plug holder
Step
6 Unplug the connectors to the double igni-
tion coils.
7 Remove the double ignition coils
2. Spring clip
Procedure
2. 5.3 washer
Procedure
73-10-00
Page 14
July 01/2012