Rotax 912 i Series Maintenance Manual page 101

Fig. 4
1. Retaining tool part no. 242660
3. M8x16 Allen screw
Step
3 Loosen the M5x12 countersunk screw
with retaining washer for the ball bearing
fastening.
4 Press the needle sleeve along with the
ball bearing out towards the gearbox with
a suitable insertion jig part no. 276332.
NOTE: The needle sleeve and ball bear-
ing are damaged by this and must
be replaced.
Fig. 5
1. M5x12 countersunk screw
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. Distance sleeve
4. Vacuum pump gear
Procedure
2. Retaining washer
Fig. 6
1. Insertion jig part no. 276332
61-20-00
Page 7
July 01/2012