Rotax 912 i Series Maintenance Manual page 308

Fig. 32
1. Coolant elbow 1
3. Coolant elbow 3
5. Expansion tank
NOTICE
WARNUNG
Ensure that the push-on length is correct!
The push-on length onto the coolant elbow on the cy-
linder head is 27 mm (1.06 in.).
Step
4 Fasten preformed hoses 1 to 4 with spring
type hose clips.
NOTE: Start with the shortest hose
(preformed hose 2). Then pre-
formed hose 1,
then preformed hose 3 and pre-
formed hose 4.
Fig. 33
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. Coolant elbow 2
4. Coolant elbow 4
Procedure
Fig. 34
Fig. 35
1. Preformed hose 1 2. Preformed hose 2
3. Preformed hose 3 4. Preformed hose 4
5. Spring type hose clip
75-00-00
Page 20
July 01/2012