Rotax 912 i Series Maintenance Manual page 356

Step
2 Mark the controller connector before
detaching.
3 Push in the tab on the top of the connector
and at the same time pull the connector
out of the connection socket.
Fig. 5
1. Controller connector A
Fig. 6
1. Connection socket
Step
4 Loosen the two round connectors
(labelled LANE A, LANE B) from fuse box.
NOTE: Unscrew the connector cap nut
anti-clockwise.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Controller connector B
2. Controller connector
Procedure
Fig. 7
Round connectors have different
NOTE:
grooves and cannot be mixed up.
Step
5 Pull the connectors in the two grooves out
of the connector socket.
FUEL PUMP - DISCONNECTION
Wiring harness designation:
- FUEL PUMP_1 (MAIN pump)
- FUEL PUMP_2 (AUX pump)
Step
1 Loosen the 4 M5x12 Allen screws from
cover of the fuel pump assy.
Fig. 8
1. M5x12 Allen screws
3. LANE OUT
Procedure
Procedure
2. LANE IN
76-50-00
Page 8
July 01/2012