Rotax 912 i Series Maintenance Manual page 173

ASSEMBLY
ASSEMBLY OF THE SPRAG CLUTCH
HOUSING
Step
1 Clean the cone of the sprag clutch hou-
sing with a cloth.
2 Apply KLUEBER ISOFLEX TOPAS to the
spear body.
Fig. 13
1. Cone
3. Sprag clutch
Step
3 Place the sprag clutch in the sprag clutch
housing; the Seeger ring must be visible.
4 Install the circlip so that its chamfer faces
the sprag clutch.
To assemble it, compress it slightly
NOTE:
with Seeger ring pliers and ensure
that the Seeger ring remains in posi-
tion and latches completely with the
noses in the sprag clutch body.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINENANCE MANUAL
Procedure
2. Sprag clutch housing
4. Spear body
Procedure
Fig. 14
1. Sprag clutch
3. Circlip
2. Seeger ring
72-20-00
Page 9
July 01/2012