Rotax 912 i Series Maintenance Manual page 348

FUSE BOX - INSTALLATION
NOTICE
WARNUNG
Installation must be carried out according to the
aircraft manufacturer's instructions and
specifications by the Installation Manual.
Step
1 Install the fuse box according to the air-
craft manufacturer's instructions.
2 Connect the fuse box to the wiring har-
ness (main harness).
NOTE: Ensure that the correct connec-
tion is made to the correspond-
ing LANE, using the marking.
FINISHING WORK
- Attach all the necessary fastenings (e.g.
cable ties, holders, clamps etc.) of the wiring
harness.
- Carry out an engine test run. See section 70-
00-00.
Effectivity: 912 i Series
Edition 1/Rev. 1
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
76-10-00
Page 36
October 01/2013