Rotax 912 i Series Maintenance Manual page 78

Fig. 9
1. Alternator bracket
3. M8x20 Allen screw
Step
3 Push the alternator into the lug of the al-
ternator bracket and fix initially finger-tight
with M10x45 hex. screw and 10.1/20/0.5
washer.
Fig. 10
1. Alternator
3. M10x45 hex. screw
Step
4 Tighten the pre-mounted M6 and M8 Al-
len screws. Tightening torque 10 Nm
(88.48 in. lb.)
5 Place the v-belt in the v-belt pulley of the
alternator.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. Lock washers
Procedure
2. 10.1/20/0.5 washer
4. Alternator bracket
Procedure
Fig. 11
1. V-belt
3. M6x50 Allen screw
Step
6 Attach the tension bar finger-tight to the
alternator bracket using 2 M8x20 hex.
screws with a lock washer and a washer.
Fig. 12
1. M8x20 hex. screws
3. Washer
2. M8x20 Allen screw
Procedure
2. Lock washer
24-30-00
Page 8
July 01/2012