Rotax 912 i Series Maintenance Manual page 344

Fig. 36
1. Regulator A
3. Cover
5. M4 Allen screws
Step
3 Disconnect the RED/WHITE cable from
B+.
4 Disconnect the BLACK cable from B and
B-.
Fig. 37
1. Regulator A
Effectivity: 912 i Series
Edition 1/Rev. 1
BRP-Powertrain
MAINTENANCE MANUAL
2. Regulator B
4. Washer
Procedure
2. Regulator B
Fig. 38
1. M5 nut + washer
Step
5 Disconnect the BLACK cable from the
regulator plate.
6 Loosen the 2 M6 lock nuts with washers
on the regulator B.
7 Pull the cables out of the fuse box..
8 Remove the regulator.
Fig. 39
1. Regulator plate
3. M4 lock nut
5. M6 lock nut
2. M4 nut + washer
Procedure
2. Regulator B
4. 4.3 washer
6. 6.4 washer
76-10-00
Page 32
October 01/2013