Rotax 912 i Series Maintenance Manual page 177

Fig. 20
WEAR LIMITS
Free wheel gear
Description
Axial clearance ES10
FINISHING WORK
- Install the ignition housing and fly wheel. See also section 24-20-00 Internal generator.
- Install the surrounding assemblies.
- Fill with operating fluids or check filling levels. See relevant Maintenance Manual Line for the
912 i Series engine type.
- Carry out an engine test run. See relevant Maintenance Manual Line for the 912 i Series engine
type.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINENANCE MANUAL
ES10
Current measu-
rement value
min max
0.5 mm 1.1 mm 0.2 mm
0.020 in. 0.043 in. 0.008 in.
Tolerance Toleran-
limit ce limit
100 % 50 %
0.4 mm current
0.014 in. replaced
07506
Measurements
72-20-00
Page 13
July 01/2012