Rotax 912 i Series Maintenance Manual page 438

COMPONENT REPAIR
THREAD
MAGNETIC DRAIN PLUG
See relevant Maintenance Manual Line for the
912 i Series engine type.
It is possible to repair the thread of the
NOTE:
magnetic plug in the crankcase with a
HeliCoil.
DRAIN PLUG
See relevant Maintenance Manual Line for the
912 i Series engine type.
FLAT AREAS
NOTICE
WARNUNG
The sealing surfaces on oil pump components
must not be repaired!
If damage to these sealing surfaces is found, the
corresponding component must be replaced
with a new part.
- Flat areas on lubricant supply components up
to a maximum of 0.3 mm (0.0118 in.).
- The indentations must not have sharp edges!
Remove sharp edges carefully with a shar-
pening stone. Damage limits must not be
exceeded!
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
79-00-00
Page 26
July 01/2012