Rotax 912 i Series Maintenance Manual page 251

FUEL PUMP ASSY. - REMOVAL
Preparation
- Drain the fuel and coolant. See also section
12-20-00 Planned maintenance.
- Remove the feed line to fuel rail 1/3 and the
return line to fuel rail 2/4 and fuel pressure
regulator and close them with the appropriate
caps.
- Drain the fuel from the fuel pump and close it
with appropriate plug caps.
Overview:
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
1. Housing
3. Pressure line
NOTE: The position and type of positioning and
attachment of the fuel pump depends on
the aircraft type. See aircraft manufactu-
rer documentation.
See overview and Fig. 33
ENVIRONMENT NOTE
All the operating fluids and cleaning agents can
damage the environment if not disposed of pro-
perly.
Dispose of operating fluids in an eco-friendly
manner!
2. Intake system
4. Fuel pump assy.
to Fig. 36.
73-10-00
Page 19
July 01/2012