Rotax 912 i Series Maintenance Manual page 282

Fig. 7
Fig. 8
Fig. 9
1. Cable ties
3. Resistance spark plug
connector
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
2. Ignition coils
4. Ignition cable assy.
SPARK PLUG - REMOVAL
Step
1 Remove the M14x1.25 SW16 spark plugs
anti-clockwise from the corresponding cy-
linder head.
NOTICE
WARNUNG
Risk of damage to spark plugs!
The spark plugs must only be removed with the
spark plug wrench!
KNOCK SENSOR - REMOVAL
See section 76-70-00 Sensors and actuators
and section 76-50-00 Wiring harness.
The knock sensor must only be removed
NOTE:
if necessary!
Procedure
74-20-00
Page 10
July 01/2012