Rotax 912 i Series Maintenance Manual page 265

Step
2 Push the throttle body into the airbox. Se-
cure 3 hex./torx collar screws and fixation
latch with LOCTITE 243.
Tightening torque 8 Nm (70.78 in. lb.).
Fig. 73
1. M6x12 hex./torx collar screws
Step
3 Install the air filter and air intake hose
(supplied by manufacturer) on the throttle
body assy. and plug in the EGT connec-
tor.
Fig. 74
1. Throttle body assy.
3. Air filter
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Fixation latch
Procedure
2. EGT connector
4. Screw hose clamp
AIRBOX - INSTALLATION
Step
1 Install a new 1-ear clamp on the connect-
ing piece.
2 Insert the airbox in the connecting piece.
Fig. 75
1. 1-ear clamps
Step
3 Fix the airbox with a new
M6 DIN 934 hex. nut on the ignition hous-
ing.
Tightening torque 10 Nm (88.48 in. lb.).
4 Fix the 1-ear clamps.
Fig. 76
1. M6 DIN 924 hex. nut
Procedure
2. Connecting piece
Procedure
2. 6.4 washer
73-10-00
Page 33
July 01/2012