Rotax 912 i Series Maintenance Manual page 252

Step
1 Loosen 4 M5 Allen screws from the cover.
2 Disconnect the fuel inlet and outlet.
3 Disconnect the fuel pumps (main, aux):
- Lift the latches
- Unplug the connectors.
Fig. 33
1. M5x12 Allen screws
3. Fuel outlet
Fig. 34
1. Main pump (main)
3. Connector (Fuel pump 1) 4. Connector (Fuel pump 2)
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Fuel inlet
2. Additional pump (aux)
Fig. 35
1. Connector
Step
4 Remove the fuel pump module from the
aircraft according to the aircraft manufac-
turer's manual.
5 Loosen the 4 M6 hex. nut and take the
fuel pump unit out of the housing.
Fig. 36
1. M6 hex. nut
3. Fuel pump unit
Procedure
2. Housing
73-10-00
Page 20
July 01/2012