Safety Notice - Rotax 912 i Series Installation Manual

4) Safety notice

Although the reading of such information does not eliminate the hazard,
General note
it promotes the understanding and application of the information con-
tained here in for correct use of the engine. Always use common work-
shop safety practice.
The information and components system descriptions contained in this
Manual are correct at the time of publication. BRP-Powertrain maintains
a policy of continuous improvement of its products without imposing upon
itself any obligation to install them on its products previously manufac-
tured.
BRP-Powertrain reserves the right at any time, and without incurring obli-
Revision
gation, to remove, replace or discontinue any design, specification, fea-
ture or otherwise.
Specifications are given in the SI metric system with the USA equivalent
Measure
in parenthesis.
This Manual uses the following symbols to emphasize particular informa-
Symbols used
tion. This information is important and must be observed.
NOTE:
ENVIRONMENTAL NOTE
Environmental notes give you tips on environmental behavior.
Effectivity: 912 i Series
Edition 1/Rev. 2
BRP-Powertrain
INSTALLATION MANUAL
Identifies an instruction which, if not followed, may
WARNING WARNUNG
cause serious injury including the possibility of death.
Identifies an instruction which, if not followed, may
CAUTION WARNUNG
cause minor or moderate injury.
Denotes an instruction which, if not followed, may se-
NOTICE
WARNUNG
verely damage the engine or other component.
Indicates supplementary information which may be need-
ed to fully complete or understand an instruction.
A revision bar outside of the page margin indicates a
change to text or graphic.
This information gives you additional advice and tips.
Tip
WARNUNG
00-00-00
page 11
January 01/2014