Safety Notice - Rotax 912 Series Maintenance Manual

3) Safety notice

General note Although the reading of such information does not eliminate the hazard,
understanding the information will promote its correct use. Always use
common workshop safety practice.
The information and components-/system descriptions contained in this
Manual are correct at the time of publication. BRP-Powertrain maintains a
policy of continuous improvement of its products without imposing upon
itself any obligation to install them on its products previously manufac-
tured.
Revision
BRP-Powertrain reserves the right at any time, and without incurring obli-
gation, to remove, replace or discontinue any design, specification, fea-
ture or otherwise.
Measure Specifications are given in the SI metric system with the USA equivalent
in parenthesis.
Symbols used
This Manual uses the following symbols to emphasize particular informa-
tion. This information is important and must be observed.
NOTES:
ENVIRONMENTAL NOTE
Environment note gives you tips and behaviors to environmental protec-
tion.
Effectivity: 912 Series
Edition 3 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Identifies an instruction which, if not followed,
WARNUNG WARNING
may cause serious injury including the possibility
of death.
Identifies an instruction which, if not followed,
CAUTION WARNUNG
may cause minor or moderate injury.
Denotes an instruction which, if not followed,
NOTICE WARNUNG
may severely damage the engine or other compo-
nent.
Indicates supplementary information which may be
needed to fully complete or understand an instruc-
tion.
A revision bar outside of the page margin indicates a
change to text or graphic.
00-00-00
page 9
September 01/2012