Other Controls - Canon imageRUNNER ADVANCE C5500 Series Service Manual

Related Alarm Codes
Waste toner alarm:
11-0001: Waste toner alarm
11-0010: Near-full state of the Waste Toner Container
■ Detection of Completion of Waste Toner Replacement
The completion of Waste Toner Container replacement is detected by the following timing/conditions.
Item
Detection timing
Parts counter
*: In the following cases, the parts counter is not automatically cleared and thus you must clear it manually.
• Replacement while "preparation warning" or "full" is not detected
• Replacement while the power is off

Other Controls

■ Special Controls
This machine has the following sequences as the special sequence.
Black Band Sequence
Transparency Sequence
● Black Band Sequence
In order to prevent flipping of the blade of the ITB Cleaning Blade, a 10 mm toner band (Bk) is supplied to the blade in the vertical
scanning direction to reduce the friction force in areas of sliding.
Control timing: Perform by changing the frequency according to the ITB duration and moisture content (environment data).
Control timing
During a job Each 200 sheets
Until reaching 50,000 sheets after replacement of the ITB, every 60 sheets in a high temperature and high
humidity environment
At job completion Each 140 sheets
Until reaching 50,000 sheets after replacement of the ITB, every 60 sheets in a high temperature and high
humidity environment
Related Service Mode
Changing of the black band sequence frequency:
COPIER > Option > CLEANING > ITBB-TMG
● Transparency Black Band Sequence
Transparency is coated in surfactant, and if a large amount of transparencies passes through the printer, the surfactant adheres
to the ITB. In order to prevent this, a 10 mm-wide Bk patch is formed on the ITB to remove the surfactant together with toner.
When the Waste Toner Sensor PCB (UN75) turns ON while "preparation warning" or "full" is detected
*
Automatically cleared
Drum Fusing Band
Solid Black Band
Details
Developing Discharge Sequence
Solid Color Band (Y/M/C/Bk)
Details
115
2. Technology