Overview Of Fixing Temperature Control - Canon imageRUNNER ADVANCE C5500 Series Service Manual

No.
[3] Shutter
H1 Fixing Heater
TH1 Main Thermistor
Fixing Heater (Center)
Fixing Film (Center)
Fixing Heater (Front Edge)
Fixing Heater (Rear Edge)
TH2 Sub Thermistor
Fixing Film (Front Edge)
Fixing Film (Rear Edge)
TP1 Thermoswitch
PS30 Fixing Pressure Sensor
PS31 Shutter HP Sensor
PS32 Shutter Position Sensor
PS37 Inner Delivery Sensor

Overview of Fixing Temperature Control

Fixing
temperature
Command for
flying start
Name
Opens and operates at seven different positions according to the size of
paper to be fed.
Ceramic Heater
This is engaged with Heater.
Temperature is controlled and abnormal temperature increase is detected.
This is engaged with the inside surface of Film.
Temperature is controlled and abnormal temperature increase is detected.
This is engaged with Heater.
Temperature is controlled and abnormal temperature increase is detected.
This is engaged with Heater.
Temperature is controlled and abnormal temperature increase is detected.
This is engaged with the inside of the film (non paper feed area).
Temperature Control, Abnormal Temperature Rise Detection, Edge Tem-
perature Detection/Cooling Control
This is engaged with the inside of the film (non paper feed area).
Temperature Control, Abnormal Temperature Rise Detection, Edge Tem-
perature Detection/Cooling Control
Heater non contact type
AC power supply is shut down at detection of a failure.
Detect the engagement/disengagement status of the Film Unit
Detect the home position of the shutter
Detect the position of the shutter
Jam Detection
STBY INTR
Flying start Startup
control (warm-up
temperature rotation)
control
temperature
Command for
print start
Function/Method
PRNT
During-print Sheet-t
control o-sheet
temperature control
temperature
120
2. Technology
Time