Motion Sensor - Canon imageRUNNER ADVANCE C5500 Series Service Manual

■ Function Expansion System Options
Main Controller PCB
Name
Voice Recognition PCB
Open I/F PCB
Image Data Analyzer PCB

Motion Sensor

Function
Automatic recovery from sleep mode
• The machine automatically recovers from sleep mode by staying in the designated area for more than a certain period of
time. The time spent in the area varies based on the setting of sensitivity (3 levels).
• The sensor determines whether a person approaches the above mentioned area is a user. If a person approaches the
machine from the front side, it starts the operation to recover from sleep mode early. If a person approaches the machine
from the side, the sensor judges whether he/she is just a passer to prevent recovery by mistake.
CAUTION:
Recovery time depends on the time for recovery from sleep mode of the host machine. The Motion Sensor outputs the
trigger for recovery from sleep mode. Operation of the Motion Sensor is the same for recovery from Deep Sleep and from
Sleep 1, but time for recovery differs depending on the recovery process of the host machine.
The machine is not recovered by a passer.
• Reduce unnecessary power consumption
• The machine may recover from sleep mode if walking speed is slow. However, if no operation is performed for a certain
period of time, it moves to sleep mode again.
CAUTION:
• Since the sensor detects heat from human body (infrared ray), do not block the sensor area.
• If the lens is heavily soiled, clean it with wet and tightly-wrung clothes or dry clothes.
Voice Operation/
Voice Guidance PCB
Voice Operation Kit, Voice Guidance Kit (for models outside Japan)
imagePASS-P1
ColorPASS-GX500 (for models outside Japan)
Scan protection for output original (Copy/SEND/Mail Box)
Image Analysis PCB
Open I/F PCB
Functions, specifications and features
64
2. Technology