Secondary Transfer Control - Canon imageRUNNER ADVANCE C5500 Series Service Manual

Related Error Code
Error in Primary Transfer Engagement/Disengagement operation
E074-0001 (ITB HP time-out error)
E074-0002 (ITB HP time-out error)
E074-0003 (Primary Transfer Detachment Sensor error)
Status of each mode/timing to enter each mode
Mode
Bk mode Only the Bk Primary Transfer Roller is engaged
Detected by the Primary Transfer Detachment Sensor 1 (PS22)
CL mode All Primary Transfer Rollers are engaged
Detected by the Primary Transfer Detachment Sensor 2 (PS23)
Full disengage- All Primary Transfer Rollers are disengaged
ment mode
Related Service Mode
Setting of the color mode in the single color Bk mode at 1/2 speed:
(Level 2) COPIER > Option > FNC-SW > BK-4CSW

Secondary Transfer Control

■ Basic Control
Secondary transfer control is control that is performed when the toner that has been transferred from the Photosensitive Drum
to the ITB is then transferred to the paper.
Condition
M15
M15
88
2. Technology
Operation status
At standby
While in deep sleep
At B&W printing (when image formation is
executed)
At color printing (when image formation is
executed)
At adjustment operation
When the ITB Pressure Release Lever is op-
erated