Canon imageRUNNER ADVANCE C5500 Series Service Manual page 115

■ Control Timing List
Execution items for image stabilization control differ according to the environment and condition of image formation parts.
Following shows the control items at each sequence.
Timing
At power- Normal environment *
on
At recovery When 8 or more hours have elapsed *
from sleep
mode
When a job When an environmental change is detected
starts
During a 4C mode When the number of sheets fed reaches 200, or the ac-
job cumulated duty ratio reaches 3000%
At job com- 4C mode Each 60 sheets fed
pletion
Each 1000 sheets fed
BK mode Each accumulated duty ratio of 2100%, or 140 sheets fed
*: The behavior differs when the COPIER > OPTION > IMG-DEV > AUTO-DH setting is enabled (the setting value is 1 or 2)
Conditions for execution ATR
Con-
trol
Yes
Yes
Yes
101
2. Technology
Real-time multi- D-max
ple tone control Control
Light Full
Yes
Yes
Yes
Yes
Yes
Yes Yes
Color
dis-
place-
ment
correc-
tion
Yes
Yes
Yes
Yes
Yes