4) Detach the fixing unit [1] toward the front.
When mounting the harness cover [1], be sure to keep the harness [2] within
the space [3] indicated in the figure so that the harness [2] will not come into
contact with the gear [4].
Do not touch the screw [1]. Turning it will change the pressure of the fixing
assembly, which cannot be adjusted in the field, necessitating the replace-
ment of the fixing assembly.
F-10-200
F-10-201
F-10-202
F-10-203
10.5.12.17 Removing the Gear
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the 4 screws [1], and detach the gear cover [2].
2) Remove the gear [1].
10.5.12.18 Removing the High-Voltage PCB
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Remove the screw [1], and detach the fixing member [2].
Chapter 10
F-10-204
F-10-205
0007-8420
0007-8422
10-41