Removing Primary Transfer High-Voltage Pcb - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > PCB > Removing Primary Transfer High-voltage PCB

Removing Primary Transfer High-voltage PCB

<Preparation>
1) Remove Rear Right Cover.
(Refer to page 4-55)
4 Parts Replacement and Cleaning > PCB > Removing Primary Transfer High-voltage PCB
1) Remove Ground wire.
• 1 screw
• 2 wire-saddles
2) Disconnect all connectors.
• 3 connectors
• 1 wire-saddle
3) Remove Primary transfer high-voltage PCB
• 4 PCB supports.
PCB support
x3
x3
Primary transfer
high-voltage PCB
wire-saddle
PCB support
4-359
F-4-817
4-359