Removing Developing High-Voltage Pcb - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > PCB > Removing Developing High-Voltage PCB

Removing Developing High-Voltage PCB

<Preparation>
1) Remove Rear Right Cover.
(Refer to page 4-55)
4 Parts Replacement and Cleaning > PCB > Removing Developing High-Voltage PCB
1) Remove Ground wire.
• 1 screw
2) Disconnect all connectors on the PCB.
• 4 connectors
3) Remove Developing high-voltage PCB.
• 6 claws
claws
x4
x6
Developing high-voltage PCB
claws
4-357
F-4-815
4-357