4) Remove the 1 screw [1].
5) Remove the low-voltage power supply PCB [1].
- 4 screws [2]
- 1 connector [3]
- 1 boss [4]
F-3-73
F-3-74
F-3-75
F-3-76
F-3-77
3.1.14 High-voltage PCB
3.1.14.1 Preparation for Removing the High-Voltage
Power Supply PCB
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Detach the rear cover. (page 3-1)[Removing the Rear Cover]
2) Remove the fixing assembly. (page
Assembly]
3) Detach the upper cover. (page 3-2)[Removing the Upper Cover]
4) Detach the left cover. (page 3-1)[Removing the Left Cover]
3.1.14.2 Removing the High-Voltage Power Supply PCB
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Detach the rear sheet metal [1].
- 15 screws [2]
2) Disconnect the 2 connectors [2] from the DC controller PCB [1].
3) Remove the high-voltage power supply PCB [1].
- 2 connectors [2]
- 4 screws [3]
- 7 claws [4]
3.1.15 Cooling Fan
3.1.15.1 Preparation for Removing the Cooling Fan
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Detach the rear cover. (page 3-1)[Removing the Rear Cover]
2) Remove the fixing assembly. (page
Assembly]
3) Detach the upper cover. (page 3-2)[Removing the Upper Cover]
4) Detach the left cover. (page 3-1)[Removing the Left Cover]
5) Remove the high-voltage power supply PCB. (page 3-11)[Removing
the High-Voltage Power Supply PCB]
Chapter 3
3-25)[Removing the Fixing
F-3-78
F-3-79
F-3-80
3-25)[Removing the Fixing
0013-9922
0013-9923
0013-9998
3-11