Removing The Primary Transfer High Voltage Pcb - Canon imageRUNNER ADVANCE C3330 Series Service Manual

■ Procedure
1. Remove the screw [1] and disconnect the connector [2].
• 1 Screw [1]
• 2 Connectors [2]
2. Release the 2 hooks [2] while pushing down the boss [1] with a screwdriver, and remove the Power Supply Cooling
Fan [3].
• 1 Boss [1]
• 2 Hooks [2]
CAUTION:
Points to Note at Installation
Be sure to insert the [A] part of the Power Supply Cooling Fan [1] into the guide [1] in the cover to install the fan.

Removing the Primary Transfer High Voltage PCB

1x
1x
[3]
[2]
[1]
[A]
[2]
281
4. Parts Replacement and Cleaning
[2]
[1]
[1]