Power Supply; Toner Safety; About Toner; Handling Adhered Toner - Canon imageRUNNER ADVANCE C5500 Series Service Manual

Hide thumbs Also See for imageRUNNER ADVANCE C5500 Series:

Table of Contents

The machine goes on when the main power switch is turned on (i.e., other than in low power mode, sleep mode).

Do not turn off the main power switch while the progress bar is indicated, during which access is made to the HDD. If

deprived of power, the HDD can suffer a fault (E602).

Power Supply

• As a general rule, do not use extension cords. Using an extension cord may result in a fire or electrical shock.

If an extension cord must be used, however, use one for local rated voltage and over, untie the cord binding, and insert the

power plug completely into the extension cord outlet to ensure a firm connection between the power cord and the extension

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Toner is a nontoxic matter composed of plastic, iron and a trace of pigments.

Never throw toner in flames to avoid explosion.

• Use dry tissue paper to wipe off toner adhered to skin or clothes and wash in water.

• Never use warm water for cleaning up toner to prevent toner particles from being gelated to soak into fibers permanently.

• Toner particles are reactive with vinyl polymers. Avoid contacting these materials.

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

• The following warnings are given to comply with Safety Principles (EN60950-1).

• Wenn mit dem falschen Typ ausgewechselt, besteht Explosionsgefahr.

Gebrauchte Batterien gema"? der Anleitung beseitigen.

Safety Precautions