Ckp Sensor Replacement - Honda 2004 Odyssey Service Manual

7. Remove the CMP (TDC) sensor (A) from the back
cover.
5 x 0.8 mm
4 N·m (0.4 kgf·m, 3 lbf·ft)
8. Install the CMP (TDC) sensor in reverse order of
removal. Reinstall the timing belt and other
removed components (see page 6-23).

CKP Sensor Replacement

1. Remove the altenator-compressor belt (see page 4-
26).
2. Loosen the adjusting nut, locknut and mounting
bolt, then remove the power steering (P/S) pump
belt (see step 6 on page 6-20).
3. Remove the dipstick and tube (see step 9 on page
6-21).
A 4. Remove the crankshaft pulley (see page 6-18).
5. Remove the upper and lower covers (see step 11
on page 6-21).
6. Remove the crankshaft position (CKP) sensor from
the oil pump.
7. Install the CKP sensor in the reverse order of
removal.
6 x 1.0 mm
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
6-61 6-61