Removing Pre-Primary Transfer Charging Assembly - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pre-Primary Transfer Charging Assembly

Removing Pre-Primary Transfer Charging Assembly

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
Caution :
When replacing this part, be sure to
perform the "operation after replacing
the pre-primary transfer charging
assembly and the pre-primary transfer
charging wire".
2) Release the release lever of pre-primary transfer charging assembly and pull out the pre-primary transfer charging assembly.
Pre-primary transfer charging assembly
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Pre-Primary Transfer Charging Assembly
1) Loosen the screw and remove the pre-primary transfer charging assembly cover.
MEMO :
When removing the pre-
primary transfer charging
assembly only, remove
the cover of the pre-
primary transfer charging
assembly.
Pre-primary transfer
charging assembly
cover
F-4-348
Release lever
F-4-349
4-177
4-177