Canon imagePRESS 1135 Series Service Manual page 797

Detail
Code Location Item
Code
E584 8003 02 Title Error in the stack delivery lower/shutter motor
Description The shutter does not come off the shutter close detection
of detection sensor.
Measures 1. Check the connector of the shutter close detection sensor
(S148), and replace the sensor if necessary.
2. Check the connector of the stack delivery lower/shutter
motor (M122), and replace the motor if necessary.
3. Replace the finisher controller PCB.
E584 8004 02 Title Error in the stack delivery lower/shutter motor
Description The shutter close detection sensor does not detect the
of detection shutter.
Measures 1. Check the connector of the shutter close detection sensor
(S148), and replace the sensor if necessary.
2. Check the connector of the stack delivery lower/shutter
motor (M122), and replace the motor if necessary.
3. Replace the finisher controller PCB.
E585 8001 02 Title Stack retainer motor error
Description HP sensor does not turn ON even though 250 msec has
of detection passed since the start of operation.
Measures 1. Check the connector of the stack retainer HP sensor.
2. Check the connector of the stack retainer motor.
3. Replace the stack retainer HP sensor.
4. Replace the stack retainer motor.
5. Replace the finisher controller PCB.
E585 8002 02 Title Stack retainer motor error
Description HP sensor does not turn OFF even though 250 msec has
of detection passed since the start of operation.
Measures 1. Check the connector of the stack retainer HP sensor.
2. Check the connector of the stack retainer motor.
3. Replace the stack retainer HP sensor.
4. Replace the stack retainer motor.
5. Replace the finisher controller PCB.
E586 8001 51 Title Error in lock of decurler shift motor (M11) of the stacker
Description Decurler shift HP sensor (S14) failed to be OFF even though
of detection specified period of time has passed in the case of adjusting
decurler pressure
Measures 1. Check the connector of the decurler shift HP sensor (S14),
and replace the sensor if necessary.
2. Replace the decurler shift motor (M11).
3. Replace the master controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E586 8001 52 Title Error in lock of decurler shift motor (M11) of the 2nd stacker
Description Decurler shift HP sensor (S14) failed to be OFF even though
of detection specified period of time has passed in the case of adjusting
decurler pressure
Measures 1. Check the connector of the decurler shift HP sensor (S14),
and replace the sensor if necessary.
2. Replace the decurler shift motor (M11).
3. Replace the master controller PCB.
E586 8002 51 Title Error in lock of decurler shift motor (M11) of the stacker
Description Decurler shift HP sensor (S14) failed to be ON even though
of detection specified period of time has passed in the case of adjusting
decurler pressure
Measures 1. Replace the decurler shift HP sensor (S14).
2. Replace the decurler shift motor (M11).
3. Replace the master controller PCB.
E586 8002 52 Title Error in lock of decurler shift motor (M11) of the 2nd stacker
Description Decurler shift HP sensor (S14) failed to be ON even though
of detection specified period of time has passed in the case of adjusting
decurler pressure
Measures 1. Replace the decurler shift HP sensor (S14).
2. Replace the decurler shift motor (M11).
3. Replace the master controller PCB.
E586 8011 51 Title Error in lock of decurler feed motor (M14) of the stacker
Description The lock signal was monitored 1.5 sec after the motor has
of detection started to be driven, and locking state continued for specified
period of time.
Measures 1. Replace the decurler feed motor (M14).
2. Replace the master controller PCB.
E586 8011 52 Title Error in lock of decurler feed motor (M14) of the 2nd stacker
Description The lock signal was monitored 1.5 sec after the motor has
of detection started to be driven, and locking state continued for specified
period of time.
Measures 1. Replace the decurler feed motor (M14).
2. Replace the master controller PCB.
E587 0001 51 Title Error in lock of cooling fan 1 (FAN1) of the stacker
Description Lock signal has been ON continuously for specified period of
of detection time
Measures 1. Replace the cooling fan 1 (FAN1).
2. Replace the master controller PCB.
E587 0001 52 Title Error in lock of cooling fan 1 (FAN1) of the 2nd stacker
Description Lock signal has been ON continuously for specified period of
of detection time
Measures 1. Replace the cooling fan 1 (FAN1).
2. Replace the master controller PCB.
7-65
Description
7-65