Canon imagePRESS 1135 Series Service Manual page 381

4
Parts Replacement and Cleaning > Main Unit > Removing Pressure Roller Unit
3) Loosen the screw remove the heater retainer (rear).
Heater retainer (rear)
5) Put a finger into the shaft hole of pressure roller with heater on and remove it from the host
machine.
4 Parts Replacement and Cleaning > Main Unit > Removing Pressure Roller Unit
F-4-182
Pressure roller unit
F-4-184
4) Move the heater in the direction of the arrow and remove it from the heater retainer (front).
Caution :
Do not touch the surface of
the pressure roller.
Caution :
When installing the new
pressure roller in the fixing
assembly, after the pressure
roller is installed in the fixing
assembly, be sure to remove
the paper rolling the pressure
roller in the direction of the
arrow.
4-117
Heater
Heater retainer (front)
F-4-183
Pressure roller
Paper of the
pressure roller
F-4-185
4-117