Canon imagePRESS 1135 Series Service Manual page 785

Detail
Code Location Item
Code
E562 8001 02 Title Error in slowing timing sensor (S30) of paper folding unit
Description The receiving-light intensity failed to be within the threshold
of detection although the emitting-light intensity is adjusted to be within
the threshold when adjusting the sensor.
Measures Check the connector of the slowing timing sensor, and
replace the sensor if necessary.
E562 8002 02 Title Error in disengagement timing sensor (S31) of paper folding
unit
Description The receiving-light intensity failed to be within the threshold
of detection although the emitting-light intensity is adjusted to be within
the threshold when adjusting the sensor.
Measures Check the connector of the disengagement timing sensor,
and replace the sensor if necessary.
E562 8003 02 Title Error in folding position accuracy sensor (S32) of paper
folding unit
Description The receiving-light intensity failed to be within the threshold
of detection although the emitting-light intensity is adjusted to be within
the threshold when adjusting the sensor.
Measures Check the connector of the folding position accuracy sensor,
and replace the sensor if necessary.
E562 8004 02 Title Error in the upper stopper HP sensor (S23) of paper folding
unit
Description The receiving-light intensity failed to be within the threshold
of detection although the emitting-light intensity is adjusted to be within
the threshold when adjusting the sensor.
Measures Check the connector of the upper stopper HP sensor, and
replace the sensor if necessary.
E566 8001 02 Title Error in side registration detection
Description Side registration sensor does not come ON within 5 sec after
of detection the side registration detection unit shift motor starts operation.
Measures 1. Check the connector of the side registration detection unit
shift motor and the side registration sensor, and replace
the motor/the sensor if necessary.
2. Replace the finisher controller PCB.
E566 8001 51 Title Error in lock of side registration detection motor (M9) of the
stacker
Description Side registration HP sensor (S2) failed to be ON even though
of detection specified period of time has passed in the case of initial
operation to shift from the standby position for each paper to
HP
Measures 1. Replace the side registration HP sensor (S2).
2. Replace the side registration detection motor (M9).
3. Replace the master controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E566 8001 52 Title Error in lock of side registration detection motor (M9) of the
2nd stacker
Description Side registration HP sensor (S2) failed to be ON even though
of detection specified period of time has passed in the case of initial
operation to shift from the standby position for each paper to
HP
Measures 1. Replace the side registration HP sensor (S2).
2. Replace the side registration detection motor (M9).
3. Replace the master controller PCB.
E566 8002 02 Title Error in side registration detection
Description Side registration sensor does not go OFF within 5 sec after
of detection the side registration detection unit shift motor starts operation.
Measures 1. Check the connector of the side registration detection unit
shift motor and the side registration sensor, and replace
the motor/the sensor if necessary.
2. Replace the finisher controller PCB.
E566 8002 51 Title Error in lock of side registration detection motor (M9) of the
stacker
Description Side registration HP sensor (S2) failed to be ON even though
of detection specified period of time has passed in the case of initial
operation to shift from the standby position for each paper to
HP
Measures 1. Replace the side registration HP sensor (S2).
2. Replace the side registration detection motor (M9).
3. Replace the master controller PCB.
E566 8002 52 Title Error in lock of side registration detection motor (M9) of the
2nd stacker
Description Side registration HP sensor (S2) failed to be ON even though
of detection specified period of time has passed in the case of initial
operation to shift from the standby position for each paper to
HP
Measures 1. Replace the side registration HP sensor (S2).
2. Replace the side registration detection motor (M9).
3. Replace the master controller PCB.
E567 8001 02 Title Error in shift roller operation
Description Shift roller unit HP sensor does not come ON within 5 sec
of detection after the side registration shift motor starts operation.
Measures 1. Check the connector of the side registration shift motor and
the shift roller unit HP sensor, and replace the motor/the
sensor if necessary.
2. Replace the finisher controller PCB.
7-53
Description
7-53