4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing the Paper Dust Cleaning Brush
Removing the Paper Dust Cleaning Brush
<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
Caution :
If the paper dust cleaning brush does not fit with the plate and is installed, an error may occur at the host machine operation.
4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing the Paper Dust Cleaning Brush
1) Hold the grip and while pushing down the paper dust cleaning brush, remove it to the left.
Paper dust cleaning brush
Grip
Paper dust cleaning brush
F-4-776
Groove
Protrusion
4-341
F-4-777
4-341