Canon imagePRESS 1135 Series Service Manual page 783

Detail
Code Location Item
Code
E551 0001 02 Title a. Error in power fan of the integration unit
b. Error in power supply fan (F1) of the insertion unit
c. Error in the power supply fan
Description b. Fan lock detection signal is detected ON while the power
of detection supply fan is driven
c. The loch signal is detected 1.2 sec or more while the fan
operation.
Measures a. Check the connector of power fan (FM1), and replace the
fan if necessary.
b. Check the connector of power supply fan, and replace the
fan if necessary.
c-1. Check the connector of the power supply fan (FAN101),
and replace the fan if necessary.
c-2. Replace the finisher controller PCB.
E551 0001 31 Title Error in power fan
Description Fan lock detection signal is detected ON.
of detection
Measures Check the connector of power fan (FM1) on the integration
unit, and replace the fan if necessary.
E551 0001 61 Title Error in the power cooling fan (right) (FM1) of the perfect
binder.
Description The lock signal of the power cooling fan (right) is detected.
of detection
Measures 1. Replace the power cooling fan (right) (FM1).
2. Replace the slave controller PCB.
E551 0001 71 Title Error in power supply fan (F1) of the insertion unit
Description Fan lock detection signal is detected ON while the power
of detection supply fan is driven
Measures Check the connector of the power supply fan, and replace the
fan if necessary.
E551 0002 02 Title a. Error in power supply fan (F1) of paper folding unit
b. Error in the power supply fan
Description a. The lock detection signal is detected ON while the power
of detection supply fan is driven, or the fan lock detection signal is
detected OFF while the power supply fan is stopped.
b. The lock status is released when the fan stops.
Measures a. Check the connector of the power supply fan, and replace
the fan if necessary.
b-1. Check the connector of the power supply fan (FAN101),
and replace the fan if necessary.
b-2. Replace the finisher controller PCB.
E551 0002 31 Title Error in power fan on the integration unit
Description The lock status is released when the fan stops.
of detection
Measures Check the connector of the power fan (FM1), and replace the
fan if necessary.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E551 0002 61 Title Error in the power cooling fan (center) (FM2) of the perfect
binder.
Description The lock signal of the power cooling fan (center) is detected.
of detection
Measures 1. Replace the power cooling fan (center) (FM2).
2. Replace the slave controller PCB.
E551 0003 61 Title Error in the power cooling fan (left) (FM3) of the perfect
binder.
Description The lock signal of the power cooling fan (left) is detected.
of detection
Measures 1. Replace the power cooling fan (left) (FM3).
2. Replace the master controller PCB.
E551 0004 02 Title Power fan error in paper folding unit
Description Power fan lock signal is detected.
of detection
Measures Check the connector of the power fan, and replace the fan if
necessary.
E551 0011 02 Title Power fan error in document insertion unit
Description Power fan lock signal is detected.
of detection
Measures 1. Check the connector of the power fan (F1), and replace the
fan if necessary.
2. Replace the inserter controller PCB.
E551 0021 02 Title Cooling fan error in paper folding unit
Description Cooling fan lock signal is detected.
of detection
Measures 1. Check the connector of the cooling fan (F1), and replace
the fan if necessary.
2. Replace the master controller PCB.
E551 0031 02 Title a. Error in power fan of integration unit
b. Error in power fan (F1) of document insertion unit
c. Error in power supply fan of finisher
Description b. During driving power fan, fan lock detection signal ON is
of detection detected.
c. During operating fan, lock signal is detected for more or
equal to 1.2 sec.
Measures a. Check the connector of the power fan (FM1), and replace
the fan if necessary.
b. Check the connector of the power fan, and replace the fan
if necessary.
c-1. Check the connector of the power supply fan (FAN101),
and replace the fan if necessary.
c-2. Replace the finisher controller PCB.
7-51
Description
7-51