Canon imagePRESS 1135 Series Service Manual page 774

Detail
Code Location Item
Code
E524 8022 52 Title Error in lock of stack tray 1 shift motor front (M24) of the 2nd
stacker
Description Stack tray 2 shift HP sensor front (S50) failed to be ON even
of detection though specified period of time has passed in the case of
initial shift operation.
Measures 1. Replace the stack tray 2 shift HP sensor front (S50).
2. Replace the stack tray 1 shift motor front (M24).
3. Replace the slave controller PCB.
E524 8031 51 Title Error in lock of stack tray 1 shift motor rear (M21) of the
stacker
Description Stack tray 1 shift HP sensor rear (S34) failed to be OFF even
of detection though specified period of time has passed in the case of
initial shift operation
Measures 1. Check the connector of the stack tray 1 shift HP sensor
rear (S34), and replace the sensor if necessary.
2. Replace the stack tray 1 shift motor rear (M21).
3. Replace the slave controller PCB.
E524 8031 52 Title Error in lock of stack tray 1 shift motor rear (M21) of the 2nd
stacker
Description Stack tray 1 shift HP sensor rear (S34) failed to be OFF even
of detection though specified period of time has passed in the case of
initial shift operation.
Measures 1. Check the connector of the stack tray 1 shift HP sensor
rear (S34), and replace the sensor if necessary.
2. Replace the stack tray 1 shift motor rear (M21).
3. Replace the slave controller PCB.
E524 8032 51 Title Error in lock of stack tray 1 shift motor rear (M21) of the
stacker
Description Stack tray 1 shift HP sensor rear (S34) failed to be ON even
of detection though specified period of time has passed in the case of
initial shift operation
Measures 1. Replace the connector of the stack tray 1 shift HP sensor
rear (S34).
2. Replace the stack tray 1 shift motor rear (M21).
3. Replace the slave controller PCB.
E524 8032 52 Title Error in lock of stack tray 1 shift motor rear (M21) of the 2nd
stacker
Description Stack tray 1 shift HP sensor rear (S34) failed to be ON even
of detection though specified period of time has passed in the case of
initial shift operation
Measures 1. Replace the connector of the stack tray 1 shift HP sensor
rear (S34).
2. Replace the stack tray 1 shift motor rear (M21).
3. Replace the slave controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E524 8041 51 Title Error in lock of stack tray 2 shift motor rear (M18) of the
stacker
Description Stack tray 2 shift HP sensor rear (S41) failed to be OFF even
of detection though specified period of time has passed in the case of
initial shift operation
Measures 1. Check the connector of the stack tray 2 shift HP sensor
rear (S41), and replace the sensor if necessary.
2. Replace the stack tray 2 shift motor rear (M18).
3. Replace the slave controller PCB.
E524 8041 52 Title Error in lock of stack tray 2 shift motor rear (M18) of the 2nd
stacker
Description Stack tray 2 shift HP sensor rear (S41) failed to be OFF even
of detection though specified period of time has passed in the case of
initial shift operation
Measures 1. Check the connector of the stack tray 2 shift HP sensor
rear (S41), and replace the sensor if necessary.
2. Replace the stack tray 2 shift motor rear (M18).
3. Replace the slave controller PCB.
E524 8042 51 Title Error in lock of stack tray 2 shift motor rear (M18) of the
stacker
Description Stack tray 2 shift HP sensor rear (S41) failed to be ON even
of detection though specified period of time has passed in the case of
initial shift operation
Measures 1. Replace the connector of the stack tray 2 shift HP sensor
rear (S41).
2. Replace the stack tray 2 shift motor rear (M18).
3. Replace the slave controller PCB.
E524 8042 52 Title Error in lock of stack tray 2 shift motor rear (M18) of the 2nd
stacker
Description Stack tray 2 shift HP sensor rear (S41) failed to be ON even
of detection though specified period of time has passed in the case of
initial shift operation
Measures 1. Replace the connector of the stack tray 2 shift HP sensor
rear (S41).
2. Replace the stack tray 2 shift motor rear (M18).
3. Replace the slave controller PCB.
7-42
Description
7-42